Address
304 North Cardinal
St. Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Address
304 North Cardinal
St. Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Timber shaping and insect killing microwave machine, it is the basis of wood product production and one of the most important links in wood processing. The quality of wood drying directly affects the yield rate of wood and the processing quality of wood products. Therefore, it is a key measure for the effective utilization of wood resources and the fundamental guarantee for the quality of wood products. Microwave energy wood drying technology provides an effective way.
The wood drying is the basis of wood product production and one of the most important links in wood processing. The quality of wood drying directly affects the yield rate of wood and the processing quality of wood products. Therefore, it is a key measure for the effective utilization of wood resources and the fundamental guarantee for the quality of wood products. Microwave energy wood drying technology provides an effective way.
Microwave dryer is widely used in wood and wood products and other industries, especially in the hard and precious wood industries such as domestic high-end furniture, exported classical furniture, craft sculptures, etc., microwave energy technology is used for drying treatment. It can effectively improve product quality, solve deformation, cracking, mildew and deterioration in the required process of production, kill moths, eggs and larvae in wood, and achieve high economic benefits. The products are widely used in the market. favored by consumers.
Advantage of timber drying shaping and insect killing microwave machine.
1. Fast drying speed.
If the moisture content of wood is reduced from 35% – 40% to 20%, the drying time is about 10-15 minutes, which is 20 – 30 times that of steam and conventional drying processes.
2. Microwave dried wood has good quality.
Since microwave drying wood materials have strong permeability and heating selectivity, the shrinkage rates of the interior and exterior ends of the wood and the middle fibers are basically the same during the drying process, so the cracking and deformation of the wood are small. However, the traditional drying method will cause deformation, cracking, mildew, deterioration and other phenomena, which will seriously affect the quality of wood and cause a large amount of scrap. Using microwave to dry wood, the utilization rate of wood can be increased by about 5%, so a lot of wood can be saved.
3. Microwave drying of wood kills harmful insects.
While drying wood with microwaves, it can kill all harmful moth eggs and larvae inside the parasitic wood. When the treatment temperature is 70-80 degrees, it only takes 2-3 minutes.
4. Energy saving and high efficiency。
Microwaves directly act on materials, so there is no additional heat energy loss. Neither the air in the furnace nor the corresponding containers generate heat, so the thermal efficiency is extremely high and the production environment is also significantly improved. Compared with far infrared heating, it can save money. Electricity 30%.
5. Save floor space and improve working conditions.
The equipment is small in size and the heat radiation is weak, so it will not create a high-temperature working environment.